Support for PA/PET

$35.99

Product Features

Easy removal by hand
Perfect support interface
Recommended for PAHT-CF, PA6-CF, PET-CF, PA-GF, etc.
Comes with High Temperature Reusable Spool
Diameter: 1.75mm +/- 0.03mm

Cautions for Use

ONLY used for support interface
Not used for printing models alone
Dry out before use
AMS compatible
AMS lite NOT Compatible
Enclosure Printers Required

Colour

Clear

SKU: N/A Categories: Bambu Filament, Filament

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

Recommended Printing Settings
Drying Settings (Blast Drying Oven)	80 °C，12h
Printing and Keeping Container’s Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	280 – 300 °C
Bed Temperature (with Glue)	80 – 110 °C
Printing Speed	< 100 mm/s

Physical Properties
Density	1.17 g/cm³
Vicat Softening Temperature	N / A
Heat Deflection Temperature	N / A
Melting Temperature	255 °C
Melt Index	29.2 ± 2.1 g/10 min

Mechanical Properties
Tensile Strength	N / A
Breaking Elongation Rate	N / A
Bending Modulus	N / A
Bending Strength	N / A
Impact Strength	N / A

Downloads

Filament TDS

Filament MSDS

Filament RoHS

Printing Tips

• Support for PA/PET needs proper drying before printing: recommended drying temperature is 80 ℃ for 8 hours in a blast drying oven, or 90 ℃ for 10 hours on heat bed. Learn more about filament drying. Please refer to Filament drying coveron WIKI.

• We recommend removing the support structures within 2 hours after printing to prevent them from sticking after absorbing moisture. If sticking occurs, dry the model to ease the removal.

What’s in the Box

Filament with Spool*1 & Desiccant*1

Package*1

Parameters Comparison

Learn more different filaments comparison on Bambu Filament Guide >>

	Support for PLA/PETG	Support for PLA	Support for ABS	Support for PA/PET	PVA
Color	Nature	White & Black	White	Green	Clear
Nozzle Type	All Size / Material	All Size / Material	0.4 / 0.6 / 0.8 mm	0.4 / 0.6 / 0.8 mm Hardened Steel	All Size / Material
Nozzle Temperature	190 – 220 °C	220 – 230 °C	240 – 270 °C	280 – 300 °C	220 – 250 °C
Bed Temperature	35 – 60 °C	35 – 45 °C	80 – 100 °C	80 – 100 °C	35 – 45 °C
Printing Speed	< 100 mm/s	< 200 mm/s	< 100 mm/s	< 100 mm/s	< 200 mm/s
Solubility	Water-insoluble	Water-insoluble	Water-insoluble, limonene-dissolvable	Water-insoluble	Water-dissolvable
Dry before Use	Optional	Optional	Optional	Required	Required
Dry Protection during Use	Optional	Optional	Optional	Required	Required
Filament Compatibility	PLA, PETG	PLA	ABS	PAHT-CF,PA6-CF,PA6-GF, PET-CF	PLA, PETG

$35.99 USD$39.99 USD

Colour	Green (65500)
Type	Filament with spool
Size	0.5kg

Reviews

There are no reviews yet.