Support for ABS

$14.24

Product Features

Easy Support Removal
Superior Support Interface Quality
Comes with High Temperature Reusable Spool
Diameter: 1.75 mm +/- 0.05mm

Cautions for Use

ONLY used for support
Optional to Dry before Use
Enclosure Printers Required
AMS Compatible
AMS lite NOT Compatible

Colour

Clear

SKU: N/A Categories: Bambu Filament, Filament

Bambu Support for ABS

Enhance your ABS printing experience with our innovative support material. Designed for effortless printing and hassle-free removal, this material ensures a flawless support interface every time. Fully compatible with the AMS systems, it streamlines your ABS printing process from start to finish. Say goodbye to tedious support removal and enjoy a smoother, more efficient workflow!

Easy Support Removal

Specially formulated for ABS, our support material adheres precisely to the ABS surface, allowing for easy support removal. This streamlines your post-processing work, ensuring a more efficient workflow.

Superior Support Interface Quality

Support for ABS enables a 0 Top Z distance and 0 Top interface spacing when printing, ensuring a scar free support surface. This enhances the sharpness of details, improving the overall appearance and integrity of your final prints.

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Parameters Comparison

Learn more different filaments comparison on Bambu Filament Guide >>

	Support for PLA/PETG	Support for PLA	Support for ABS	Support for PA/PET	PVA
Color	Nature	White & Black	White	Green	Clear
Nozzle Type	All Size / Material	All Size / Material	0.4 / 0.6 / 0.8 mm	0.4 / 0.6 / 0.8 mm Hardened Steel	All Size / Material
Nozzle Temperature	190 – 220 °C	220 – 230 °C	240 – 270 °C	280 – 300 °C	220 – 250 °C
Bed Temperature	35 – 60 °C	35 – 45 °C	80 – 100 °C	80 – 100 °C	35 – 45 °C
Printing Speed	< 100 mm/s	< 200 mm/s	< 100 mm/s	< 100 mm/s	< 200 mm/s
Solubility	Water-insoluble	Water-insoluble	Water-insoluble, limonene-dissolvable	Water-insoluble	Water-dissolvable
Dry before Use	Optional	Optional	Optional	Required	Required
Dry Protection during Use	Optional	Optional	Optional	Required	Required
Filament Compatibility	PLA, PETG	PLA	ABS	PAHT-CF,PA6-CF,PA6-GF, PET-CF	PLA, PETG

Accessory Compatibility

	Recommended	Not Recommended
Build Plate	Smooth PEI Plate,Textured PEI Plate	/
Hotend	0.4 / 0.6 / 0.8 mm	0.2 mm
Bambu Liquid Glue / Glue Stick	Bambu Liquid Glue / Glue Stick	/

Recommended Printing Settings
Drying Settings (Blast Drying Oven)	80 °C, 4 h
Printing and Keeping Container’s Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	240 – 270 °C
Bed Temperature (with Glue)	80 – 100 °C
Printing Speed	< 100 mm/s

Physical Properties
Density	1.16 g/cm³
Vicat Softening Temperature	N / A
Heat Deflection Temperature	N / A
Melting Temperature	195 °C
Melt Index	11.6 ± 0.7 g/10 min

Mechanical Properties
Tensile Strength	N / A
Breaking Elongation Rate	N / A
Bending Modulus	N / A
Bending Strength	N / A
Impact Strength	N / A

Downloads

Filament TDS

Filament MSDS

Filament RoHS

Printing Tips

• Support for ABS is soluble in limonene. Please pay attention to the usage norms and safety.

• Pungent and unpleasant odors may be released during printing. Make sure your printer is enclosed and placed in a well-ventilated area.

• When layer strength is required, it is recommended to increase the flushing volume to above 800 mm³. If the flushing is not thorough, it may reduce the layer adhesion of the model at surfaces that are on the same horizontal plane as the support surface.

• By increasing the “initial layer speed”, a more peelable support can be obtained. However, this will increase the risk of warping.

• Dry out before use for higher print quality. Drying conditions: 80℃ for 4 hrs in the blast drying oven; 85 – 95 ℃ for 6 hrs in the X1 Series Heatbed. Please refer to Filament drying instructions on WIKI.

• For more support-related settings, please refer to Support on WIKI.

What’s in the Box

Filament with Spool*1 & Desiccant*1

Package*1

$14.24 USD$14.99 USD

Colour	White (66100)
Type	Filament with spool
Size	o.5kg

Reviews

There are no reviews yet.