PLA Glow

$24.99

Product Features

Unique Glow in Low Light Conditions
Includes Basic Reusable Spool
Diameter: 1.75mm +/- 0.03mm

Cautions for Use

AMS Compatible, but can lead to faster wear on internal components
AMS lite NOT Compatible
0.2 mm Nozzle Not Compatible

Colour

Clear

SKU: N/A Categories: Bambu Filament, Filament

Bambu PLA Glow

PLA Glow stands out due to its incorporation of a unique additive: luminous powder. This variant retains the familiar qualities of traditional PLA, including easy printing, high quality, and exceptional overall mechanical properties. What sets PLA Glow apart is its distinctive feature – it glows in the dark. This makes it the optimal selection for crafting luminous nameplates, logos, jewelry, and various models that require a captivating glow effect.

Unique Glow in Low Light Conditions

Bambu PLA Glow incorporates a distinct additive: luminous powder, which imparts a special property to printed objects, causing them to emit a captivating glow in the dark.

Accessory Compatibility

	Recommended	Not Recommended
Build Plate	Cool Plate, High Temperature Plate or Textured PEI Plate	Engineering Plate
Hotend	0.4, 0.6, 0.8 mm Hardened Steel Nozzle*	0.2 mm Nozzle
Glue	Bambu Liquid Glue Glue Stick	/
AMS & AMS lite	AMS	AMS lite*

* A hardened nozzle is required when printing regularly.

* It is not recommended to print Bambu PLA Glow and other glow-in-the-dark PLA filaments with AMS Lite. These filaments, being hard and rough, may cause feeding failures due to substantial feeding resistance.

PLA Glow Hex Code Table

Color	Hex Code	Display
Glow Green	#A1FFAC
Glow Yellow	#F8FF80
Glow Pink	#F17B8F
Glow Blue	#7AC0E9
Glow Orange	#FF9D5B

* The hex code indicates the daytime color of PLA Glow.

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Recommended Printing Settings
Drying Settings (Blast Drying Oven)	55 °C，8 h
Printing and Keeping Container’s Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	190 – 230 °C
Bed Temperature (with Glue)	35 – 45 °C
Printing Speed	< 250 mm/s

Physical Properties
Density	1.26 g/cm³
Vicat Softening Temperature	56 °C
Heat Deflection Temperature	55 °C
Melting Temperature	155 °C
Melt Index	23.3± 2.4 g/10 min

Mechanical Properties
Tensile Strength	32 ± 3 MPa
Breaking Elongation Rate	8.6 ± 1.2 %
Bending Modulus	2640 ± 130 MPa
Bending Strength	76 ± 4 MPa
Impact Strength	27.3 ± 2.2 kJ/m²

Downloads

Filament TDS

Filament MSDS

Filament RoHS

Printing Tips

• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.

• Printing with a 0.2 mm nozzle is not recommended; instead, it is advised to use a 0.4 mm nozzle for optimal results.

• The model’s luminous intensity diminishes over time, but exposure to ultraviolet or sunlight for a brief period (approximately 2 hours) can rejuvenate its glow. However, prolonged or frequent irradiation may expedite PLA aging.

• Not suitable for AMS lite: Utilizing AMS lite may result in high feed resistance and an increased risk of feed failure. Consider alternative methods such as pre-use drying for better outcomes.

What’s in the Box

Filament with Spool*1 & Desiccant*1

Package*1

$24.99 USD

Colour	Glow Green (15500), Glow Blue (15600), Glow Pink (15200), Glow Orange (15300), Glow Yellow (15400)
Type	Filament with spool
Size	1kg

Reviews

There are no reviews yet.